0

Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters

Model Number: PosiTector RTR 3D

Replica Tape Reader to Measure and Record 2D/3D Surface Profile Parameters
Digital spring micrometers measure and record surface profile parameters using Testex Press-O-Film™ replica tape.
Create a replica by burnishing tape on a surface and insert into instrument. 3D imagery and 2D/3D parameters are displayed in seconds!
Reports common parameters: Ra, Rq, Rz, Rp, ­Rv, Rt, Rpc (2D), and Sa, Sq, Sz, Sp, Sv, and Spd (3D)
Ideal for field or laboratory use; flat, curved or irregular surfaces Certified and traceable to an accredited national laboratory
Download 3D .SDF image files for analysis in included PosiSoft or third party ­­­software
Certificate of Calibration showing traceability to PTB (for H and HL only) and NPL (for Ra and Rt) included (Long Form)
Conforms to ASME B46, ASTM D4417, ISO 8503-5, NACE SP287, SSPC-PA 17, SSPC-SP5, SP6, SP10, SP11-87T and others

Qty :

INDUSTRY: Coating Industry - Powder, Paint, ED Paint

APPLICATION: Surface Testing

Measuring Range (H) : 20 – 115 µm
Measuring Range (Rt) : 10 – 115 µm
Minimum Roughness (Ra):µm 0.4 – 4.5 mils
Minimum Roughness (Ra): 2µm
Accuracy (H) : + 5 µm
Accuracy (Rt)* :+ (5 µm + 5%)
Anvil Pressure :1.1 Newtons
Anvil Size : Ø6.25 mm
Field of View :3.8 x 3.8 mm
Lateral Sampling :3.7 µm
Vertical Resolution :100 nm - 2D/3D
10 nm - SDF
Resolution : 0.1 µm

Leaflet

Add a Review