0

Heat Sealer - 4-Zone Gradient Hot Bar Laboratory Heat Sealer.

Model Number: TA4-GL/1

This model features four temperature zones along the length of the upper heated jaw and four temperature zones along the length of the lower heated jaw (each of the eight zones is independently controlled via eight separate temperature controllers).

CeraTek TA4-GL/1 Heat Sealer 4-Zone Gradient Hot Bar Laboratory Heat Sealer.

This model features four temperature zones along the length of the upper heated jaw and four temperature zones along the length of the lower heated jaw (each of the eight zones is independently controlled via eight separate temperature controllers).

digital timer
eight dual display digital temperature controllers (Fahrenheit/centigrade switchable)
resettable panel mounted digital cycle counter
surface mounted thermocouples
analog pressure gauge and regulator
dual action cylinders
electronic timer activation
110 volts, 50/60 Hz
One foot switch to activate the cycle start is included
ASTM F2029

CE compliant. The guarding meets ANSI, OSHA and CE requirements regarding the opening in relation to any burn or pinch points.

Additional Information
Model Name TA4-GL/1
Testing Property Adhesion, Seal Strength, Sample Preparation

Qty :

INDUSTRY: Packaging

APPLICATION: Paper & Packing Inst.

Case Dimension: 1

Timing Range: 0.01 to 99.99 seconds
Repeat Accuracy: ±0.01% ±0.05 sec max
Temperature Range: Ambient to 400°F
(thermal die sealers only)
Setting & Display Accuracy:±0.5% full scale / ± 1 digit max
Pressure Range: 5 to 100 PSIG
Regulator Repeatability: ±3.6 PSIG
Electrical Requirements: 100-130 Volts A/C, 50/60 Hz, 1 Phase
Pneumatic Requirements: 125 PSI max (air, CO2 or Nitrogen)

Leaflet

Add a Review