0

SALT SPRAY / CYCLIC CORROSION CHAMBER

Model Number: SSP/CCT/CRH

Q-FOG chambers are constructed of reinforced fiberglass and there is no internal steel framework to corrode. They feature precise control of fog volume through the use of a variable speed peristaltic pump. Variable humidity control and shower capabilities are available as options. A remarkably simple user interface allows for easy user programming and operation. The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down. Purified water is required for proper operation.

Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements.

Qty :

INDUSTRY: Corrosion / Weathering

APPLICATION: Corrosion Testing

Case Dimension: .

Model SSP for Prohesion or Conventional Salt Spray Tests
Numerous accelerated corrosion tests may be performed in a Q-FOG SSP corrosion tester including Prohesion, ASTM B117 and G85, BS 3900 F4 and F9, DIN 50.021, and ISO 9227. The Prohesion test uses fast cycling, rapid temperature changes, a low humidity dry-off cycle, and a different corrosive solution to provide a more realistic test. Most of these tests are performed to particular specifications such as ASTM B117 (Salt Spray), and BS 3900 F4. These tests are widely used for relative corrosion testing. They are typically run at an elevated temperature and do not incorporate a dry-off cycle. They require heated, humidified air for the spray.

Model CCT for Corrosion Research and Cyclic Automotive Tests
The Q-FOG model CCT has all the advantages of the model SSP, but adds the flexibility of including a 95-100% Humid Function. Today’s automotive corrosion test methods typically call for exposing specimens to a repetitive cycle of salt spray, high humidity, low humidity dry-off, and ambient conditions. Model CCT units come equipped with a viewing window in the side of the lid and an internal light to allow easy monitoring of specimens.

MODELS :-
Q-FOG SSP-600: conventional salt spray and Prohesion tests, 640 liter chamber volume
Q-FOG SSP-1100: conventional salt spray and Prohesion tests, 1103 liter chamber volume
Q-FOG CCT-600: conventional salt spray, Prohesion, and 100% humidity, 640 liter chamber volume
Q-FOG CCT-1100: conventional salt spray, Prohesion, and 100% humidity, 1103 liter chamber volume

Model CRH for Research and Cyclic Automotive Tests with Variable Relative Humidity (RH) Control
The Q-FOG model CRH has all the advantages of the model CCT, but adds full variable relative humidity control through the use of an innovative air pre-conditioner. Additionally, this model includes an optional programmable shower feature. The model is compatible with most major automotive corrosion test standards, such as GMW 14872, SAE J2334 and others from Ford, ISO, VW, Volvo, Chrysler, Renault, etc.

MODELS
Q-FOG CRH600-HSC: conventional salt fog and Prohesion tests, humidity control, shower module, 640 liter chamber volume
Q-FOG CRH1100-HSC: conventional salt fog and Prohesion tests, humidity control, shower module, 1103 liter chamber volume

Leaflet

Add a Review