0

PosiTest® AT Pull-off Adhesion Testers (Manual) (ATM20)

Model Number: ATM20

Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.
-Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583
-Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
-Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
-Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
-10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
-Calibrated and certified to ± 1% accuracy using a NIST traceable load cell
-Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4642/16276-1, BS EN 12004-2, AS/NZS 1580.408.5 and others

Qty :

INDUSTRY: Paint & Powder Coating Industry

APPLICATION: Coating Inspection

-Model : ATM20
-Dolly size & stand-off* : 20mm
-Typical Application : Higher band strength coating on metal
-Range : 0.7 - 24 Mpa, 100 - 3000 psi
-Resolution : 0.01 Mpa (1psi)
-Accuracy : +/-1 % Full Scale
-Included dollies : Ø20 mm (qty 20) Aluminium
-Cutting tool : 20mm hole saw

Leaflet

Add a Review