Dynamic climate chambers for rapid temperature changes with humidity control and extended low temperature range - Series MKFT

Model Number: Model MKFT 115 - 115 L
Model MKFT 240 - 228 L
Model MKFT 720 - 734 L

The BINDER MKFT series environmental simulation chamber for low temperature alternating climate profiles is the specialist for dynamic alternating climate change between -70 °C and 180 °C. Large performance reserves and rapid cooling make the MKFT environmental simulation chamber the high-end product for complex standards-based climate tests.

Qty :



Case Dimension: .


Homogeneous climate conditions thanks to APT.line™ technology
Automatic water and wastewater management
Pressure humidification with fast response times
Comprehensive programming and data acquisition
Large heated viewing window
Important characteristics

Temperature range: -70 °C to 180 °C
Humidity range: 10 % to 98 % RH
Integrated water-storage tank, 20 liters
4 zero-voltage relay contacts
APT.line™ preheating chamber technology
Programmable condensation protection for test material
Intuitive touchscreen controller with time-segment and real-time programming
Internal data logger, measured values can be read out in open format via USB
Heated viewing window with LED interior lighting
Humidity regulation with capacitative humidity sensor and vapor humidification
BINDER Multi Management Software APT-COM™ Basic Edition
Troubleshooting system with visual and audible alarms
Class 2 independent adjustable temperature safety device (DIN 12880) with visual alarm
Access port with silicone plug (Models 115, 240: 50 mm, left)
2 access ports with silicone plugs (Model 720: 80 mm, left and right)
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel
Adjustable ramp function
Integrated chart recorder
Real-time clock
Door heating
Alarm notification in the event of insufficient water in fresh water tank
1 stainless steel rack
Complete safety connection kit for water supply and drainage, up to 1 m in height
Inner chamber made of stainless steel
CFC-free refrigerants R-452A and R-23
Cooling with cascade compressor cooling unit

Add a Review