High Temperature 8 Bank Shear Tester (SS-HT-8)

Model Number: SS-HT-8

Getting precise measurements every time with high temperature shear tests is easy with the ChemInstruments S-HT-8 High Temperature 8 Bank Shear Tester. It performs a wide variety of shear tests, including PSTC-7 Procedure A & C, TLMI Test No. 7, FINAT test No. 8, and ASTM D 3654. The Shear Tester also performs Procedure C for holding power of pressure sensitive tapes.

Switches on the standard model can withstand temperatures up to 400°F (204°C). It can also perform shear tests in humidity chambers or freezers.

Qty :


APPLICATION: Adhesive Testing

-Model : SS-HT-8
-Rugged construction, capable of withstanding the abuse of the production environment
-Compact and easy to use
-Two component design allows the switch unit to be separated from the timer control box
-High temperature, 8' long (2.5m), cable interfaces the two components
-Easy-to-read, 0.5" (1 cm) LCD timer display is set to time in increments of 1/10 of a minute
-Designed to use standard, 2" x 3" (50mm x 75mm) format, test panels
-Capable of holding panels of various thicknesses, up to 1/4" (6mm)
-Mechanical switches can be calibrated to trip when using weights from 100 to 1,000 grams
-Adjustable feet allow the user to level the testing plane
-Panel rack is marked for the standard 178° back tilt, as specified by most shear test methods
-Adjustable angle panel rack allows the user to easily change the test angle from 178° to 90°
-Shear stand operating temperature range 20° - 400° F (-6° - 204° C)
-Timer box operating temperature range 32° - 150° F (0° - 70° C)
-Timer box has universal input voltage from 85-265 VAC (50/60 Hz)
-Shears are designed to be used with weights from 100gr to 1000gr
-Any weight which is larger than the 1000gr requires the S-EXT(Shear Extension) accessory
-The largest weight that can be safely used with the shear stand is 3000gr
-Contact us to inquire about the usage of larger than 3000gr weights


Add a Review