|
IMMERSION VISCOSITY BEAKER
Aluminium
viscosity beakers with stainless steel inner cavity and
handle. Holds 100 ml. if inside measurement complies with
DIN 52 211. Ideal for measuring coatings and other fluids
during application or production.
Pyknometers for determining the specific gravity of
coatings, pastes or similar liquids.
Available in anodised aluminium and stainless steel, 100 ml.
and 50 ml.
Top
OCTOPLEX FILM APPLICATOR
8-sided
film applicator.
Multifunctional applicator with the following gaps: 25, 50,
75, 100, 125, 150, 175, 200 micron.
Film application width 60 mm.
Made of high-grade stainless steel.
VF1550
Octoplex
film applicator 25,50,75,100,125,150,175and200µm
8-sided
film applicator.
Multifunctional applicator with the following gaps: 25, 50,
75, 100, 125, 150, 175, 200 micron.
Film application width 60 mm.
Made of high-grade stainless steel.
Top
SPIRAL BAR
COATER
Stainless
steel, comprising of a wire rolled around a cylindrical rod.
Used for applying one or more products with a high coating
capacity.
Also works on flexible substrates. 34 gaps available,
ranging from 4 to 500 µm.
Best results are obtained by using it with a motorised
applicator.
Top
TEST CARDS DIN/ASTM/ISO/FTMS
A wide
range of top quality test cards for determining hiding power
and/or penetration. They come in a variety of dimensions
from DIN A6 up to and including DIN A3. All types are
available in coated and uncoated versions. There is a
section on each card for filling out the date, time and test
number.
Top
ILLUMINATED ASSESSMENT CABINETS - TQC COLORBOX
An extensive range of illuminated cabinets with four
different types of light sources for visual assessment of
products for colour, gloss, structure, damage etc. Available
in different dimensions, and also come with an adjustable
bottom.
Also available as a portable model.
Top
CONICAL MANDREL ELASTICITY TESTER BD3000 ASTM/BS/ISO/FMTS
Elasticity tester provided with a conical mandrel sloping
from a diameter of 2mm to a diameter of 38.1mm.
The entire elasticity range can be examined using this one
test.
VF2368
Elasticity tester provided with a conical mandrel sloping
from a diameter of 2mm to a diameter of 38.1mm.
The entire elasticity range can be examined using this one
test.
VF2368
Top
IP2000 DROP TEST OR "IMPACT TEST" DIN/ISO
Test for
determining the impact resistivity/flexibility or coatings
in accordance with DIN/ISO6272 and ASTM D2794. The dual
scale (ISO / ASTM) instrument is equipped with a clamping
device for the test panel. Includes built-in spirit level
for correct positioning. Includes standard weight. Optional
weights available at an additional cost.
Top
CP2000 DENT TEST OR "CUPPINGTEST"
Revolutionary apparatus for testing the resistivity or
coatings at various stages or deformation in accordance with
DIN/ISO1520.
The delayed transmission ensures that very littlie force is
required, and that deforming proportionally can take place
with the aid or a stamp.
The degree or deformation is digitally recorded at a
resolution or 0.01 mm.
A powerful, illuminated loupe guarantees clear optical
assessment or the panel under testing.
SP4200
Top
BH2000 INDENTATION TESTER "BUCHHOLZ"
Standard
test for measuring the hardness or coatings. Complies with
ISO2815 standard. The set consists or a calibrated slip-on
weight with a special cutter, an illuminated microscope, a
level gauge, a digital dual timer, and a marker with
template.
SP1900
>> More
Top
SCRATCH HARDNESS TESTER RW 1 ACCORDING TO WOLFF-WILBORN
Simple
method for testing the scratch hardness of coatings. In this
test, pencils in a range of grades are used, each being
moved over the surface under a 45° angle with a constant
pressure of 7.5 Newton. An optical reading is then carried
out to see whether the surface is damaged.
Delivered incl. 17 pencils in carrying case.
Top
CROSS CUT ADHESION TESTER
For measuring the adhesion and brittelness of dried lacquer
and paint coatings. The square or rhombus shaped patches
forming a lattice are given a short treatment with a stiff
brush, where upon the coating can be examined, if the
corners of the cuts are more or less damaged. Comparising by
using a table chart.
Top
MULTI-TESTER MASTER PAINT PLATE
Multi-functional stainless steel measuring tool. Can be used
for : a 1-2-3mm pane adhesion test and ASTM-cross, measuring
wet film thickness or up to 150 microns, checking for
correct cover or edges, optically determining thickness or
glass, as well as providing an indication or the viscosity
or the coating. Delivery includes cutting tool and tape.
SP3000
Dimensions: 100 x 55 mm.
Top
Dew check series
Extremely
versatile tool for measuring and recording all climate
parameters required for treating surfaces. This easy-to-use
and robust instrument measures air temperature, surface
temperature, air humidity and dewpoint and calculates the
difference between the surface and dew point temperature,
indicating optimum climate conditions for painting. All
parameters, incl. time and date, are stored in the memory,
can be retrieved at a later stage or printed wireless to the
optional HP-Ir printer.
This ergonomic instrument is delivered in a sturdy case
complete with certificate.
Top
BD2000 CYLINDRICAL BEND TEST
Bend test for determining the elasticity or coatings in
accordance with ISO1519.
A test panel (format 50 X 100 mm) is bent over a cylindrical
mandrel. The smaller the diameter or the mandrel, the
greater the tension on the coating. The test panel is then
checked for cracks or damage.
SP1800
The BD2000 includes 1 optional
mandrel.
Top
CURVE-X2 DATALOGGER WITH SOFTWARE AND DATACABLE
The Curve-X-2 offers easy-to-use, high quality temperature
datalogging for paint curing ovens. Measurements, analysis
levels and report options are fully customizable to provide
you with tailor-made information on the quality of your
curing processes. The datalogger is fitted with a large
display for easy menu-driven operation and quick display of
measurement results. TQC’s Ideal Finish data analysis
software allows you to analyse the logged data and create
detailed reports. These advanced features, together with a
wide range of display and printing options, makes Curve-X-2
the most flexible temperature datalogging solution
available, excellently suited for both field use and
laboratory conditions.
CX1002
Curve-X2
Size: 85 x 105 x 30 (50 with add-on) mm
Weight: 285 gram
Channels: 6 or 12 with "add-on" unit
Range: -50°C to +1200ºC / -58°F to +2200°F
Accuracy: ± 0.3°C / ± 0.6°F
Resolution: 0.1°C / 0.2°F
Interval: From 1 sec. to 1 hour
Memory: 10 batches of 25000 readings each
Batteries: 3 pcs. 1.5V AA-type
Battery life: 1200 hours continuous use or 10.000 hours
stand-by
Top
|
