|
AENOR |
UNE 53-173-92 Part
2 |
Decorative High
Pressure Laminates (HPL); Sheets Based on
Thermosetting Resins; Part 2: Determination of
Properties |
|
AENOR |
UNE EN 13672 |
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
AENOR |
UNE EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
AENOR |
UNE EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
AENOR |
UNE 57095 |
Paper and cardboard
- Determination of Resistance to Abrasion -
Taber Method |
|
AENOR |
UN EN 438-2 |
Decorative High
Pressure Laminates (HPL); Sheets Based on
Thermosetting Resins; Part 2: Determination of
Properties |
|
AENOR |
UN EN 13329:E |
Laminate floor
Coverings - Specifications, Requirements and
Test Methods |
|
AENOR |
UN EN 13696 |
Wood and Parquet
Flooring - Determination of Elasticity and
Resistance to Wear |
|
AFNOR |
FD ENV 13696 |
Wood and Parquet
Flooring - Determination of Elasticity and
Resistance to Wear |
|
AFNOR |
NF B 51-282 |
Melamine Faced
Particleboards - Determination of Resistance to
Abrasion |
|
AFNOR |
NF EN 13672
|
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
AFNOR |
NF EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
AFNOR |
NF EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
AFNOR |
NF G 37-121 |
Rubber or Plastic
Coated Fabric-Determination of the Wear
Resistance by Rubbing with two Abrasive Wheels
|
|
AFNOR |
NF Q 03-055 |
Paper and Board
Tests - Determination of Abrasion Resistance of
Paper and Board (by Taber Method)
|
|
AFNOR |
NF T 30-015 |
Paints and
Varnishes - Abrasion Resistance Test
|
|
AFNOR |
NF EN 438-2 |
Decorative High
Pressure Laminates (HPL); Sheets Based on
Thermosetting Resins; Part 2: Determination of
Properties |
|
AFNOR |
NF EN 660-2 |
Resilient floor
coverings - Determination of wear resistance -
Part 2: Frick-Taber Test |
|
AFNOR |
NF EN ISO 5470-1 |
Rubber or Plastics
Coated Fabric-Determination of Abrasion
Resistance |
|
ANSI |
INCITS 322-2002 |
Card Durability
Test Methods |
|
ANSI/NSF |
35 |
High Pressure
Decorative Laminates for Surfacing Food Service
Equipment |
|
ANSI/NSF |
49 |
Class II (Laminar
Flow) Biohazard Cabinetry |
|
ANSI/NSF |
51 |
Food Equipment
Materials |
|
ANSI/SAE |
Z26.1-1996 |
Safety Glazing
Materials for Glazing Motor Vehicles and Motor
Vehicle Equipment |
|
AS |
AS 2001.2.28 |
Methods of Test for
Textiles |
|
AS |
AS/NZS 1580.403.2 |
Paints and Related
Materials - Methods of Test |
|
AS |
AS/NZS 4266.2 |
Reconstituted
wood-based panels - Methods of Test -
Determination of resistance to surface abrasion
(Taber abrasion test) |
|
ASTM |
C501 |
Standard Test
Method for Relative Resistance to Wear of
Unglazed Ceramic Tile by the Taber Abraser |
|
ASTM |
C1353 |
Standard Test
Method Using the Taber Abraser for Abrasion
Resistance of Dimension Stone Subjected to Foot
Traffic |
|
ASTM |
D1044 |
Standard Test
Method for Resistance of Transparent Plastics to
Surface Abrasion |
|
ASTM |
D3389 |
Standard Test
Method for Coated Fabrics Abrasion Resistance
(Rotary Platform Double-Head Abrader) |
|
ASTM |
D3451 |
Standard Practices
for Testing Polymeric Powders and Powder
Coatings |
|
ASTM |
D3730 |
Standard Guide for
Testing High-Performance Interior Architectural
Wall Coatings |
|
ASTM |
D3884 |
Standard Guide for
Abrasion Resistance of Textile Fabrics (Rotary
Platform, Double-Head Method) |
|
ASTM |
D4060 |
Standard Test
Method for Abrasion Resistance of Organic
Coatings by the Taber Abraser |
|
ASTM |
D4685 |
Standard Test
Method for Pile Fabric Abrasion
|
|
ASTM |
D4712 |
Standard Guide for
Testing Industrial Water-Reducible Coatings |
|
ASTM |
D5144 |
Standard Guide for
Use of Protective Coating Standards in Nuclear
Power Plants |
|
ASTM |
D5146 |
Standard Guide to
Testing Solvent-Borne Architectural Coatings |
|
ASTM |
D5324 |
Standard Guide for
Testing Water-Borne Architectural Coatings |
|
ASTM |
D6037 |
Standard Test
Methods for Dry Abrasion Mar Resistance of High
Gloss Coatings |
|
ASTM |
D7255 |
Standard Test
Method for Abrasion Resistance of Leather
(Rotary Platform, Double-Head Method)
|
|
ASTM |
F362 |
Standard Test
Method for Determining the Erasability of Inked
Ribbons |
|
ASTM |
F510 |
Standard Test
Method for Resistance to Abrasion of Resilient
Floor Coverings Using an Abrader with a Grit
Feed Method |
|
ASTM |
F1478 |
Standard Test
Method for Determination of Abrasion Resistance
of Images Produced from Copiers and Printers
(Taber Method) |
|
ASTM |
F1978 |
Standard Test
Method for Measuring Abrasion Resistance of
Metallic Thermal Spray Coatings by Using the
Taber Abraser |
|
BSI |
BS 3900 |
Paints and
Varnishes; Determination of Resistance to
Abrasion |
|
BSI |
BS DD ENV 13696 |
Wood and Parquet
Flooring - Determination of Elasticity and
Resistance to Wear |
|
BSI |
BS EN 13672
|
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
BSI |
BS EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
BSI |
BS EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
BSI |
BS EN 438-2 |
Decorative High
Pressure Laminates (HPL); Sheets Based on
Thermosetting Resins; Part 2: Determination of
Properties |
|
BSI |
BS EN 660-2 |
Resilient floor
coverings - Determination of wear resistance -
Part 2: Frick-Taber Test |
|
BSI |
BS EN ISO 5470-1 |
Rubber or Plastics
Coated Fabric-Determination of Abrasion
Resistance |
|
CEN |
EN 13672
|
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
CEN |
EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
CEN |
EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
CEN |
prEN 14688
|
Sanitary appliances
- Wash basins - Functional requirements and test
methods (part 5.7) |
|
CFFA |
P-101C |
Min Performance
Standards for Vinyl Swimming Pool Liners -
In-Ground |
|
CFFA |
Test 1 |
Standard Test
Methods - Chemical Coated Fabrics and Film |
|
CFFA |
Test 200 |
Standard Test
Methods - Chemical Coated Fabrics and Film |
|
CNS |
K6591 |
Method of Test for
Polyurethane Athletic Installation Material |
|
Daimler-Chrysler |
LP-463KB-21-01 |
Wear Resistance of
Trim Materials - Taber Method |
|
Daimler-Chrysler |
MS-PP11-1 |
Vacuum Metallizing
for Plastic Parts - First Surface Interior |
|
Daimler-Chrysler |
MS-PP11-2 |
Vacuum Metallizing
- High Wear Resistance- For Plastic Parts -
First Surface Interior |
|
Dept of Defense |
MIL-A-8625F(1) |
Military
Specification - Anodic Coatings for Aluminum and
Aluminum Alloys |
|
Dept of Defense |
MIL-C-22992E |
General
Specification for Connectors, Plugs and
Receptacles, Electrical Waterproof, Quick
Disconnect, Heavy Duty Type |
|
Dept of Defense |
MIL-P 18493 (NAVY) |
Military
Specification - Packing, Performed, Carbon; and
Carbon Stock, Packing |
|
Dept of Defense |
MIL-PRF-61002A |
Military
Specification - Pressure-Sensitive Adhesive
Labels for Bar Coding |
|
Dept of Defense |
MIL-STD-13231 |
Department of
Defense Standard Practice - Marking of
Electronic Items |
|
Dept of Defense |
MIL-T-28800E |
Military
Specification - General Specification for Test
Equipment for use with Electrical and Electronic
Equipment |
|
DIN |
DIN 52 347 |
Testing of Glass
and Plastics; Abrasion Test; Method Using
Abrasion Wheels and Measurements of Scattered
Light |
|
DIN |
DIN 53 109 |
Testing of Paper
and Board; Determination of Abrasion by the
Abrasion Wheel Method |
|
DIN |
DIN 53 754 |
Testing of
Plastics; Determination of Resistance of Wear by
Abrasive Wheels |
|
DIN |
DIN 53 799 |
Decorative
Laminated Sheets on Basis of Aminoplastic
Resins; Test Method |
|
DIN |
DIN 68 861 T2 |
Furniture Surfaces:
Behavior at Abrasion |
|
DIN |
DIN EN 660-2/A1 |
Resilient Floor
Coverings - Determination of Wear Resistance -
Part 2: Frick-Taber Test; Amendment A1 |
|
DIN |
DIN EN 13672
|
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
DIN |
DIN EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
DIN |
DIN EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
DIN |
DIN EN ISO 5470-1 |
Rubber or Plastics
Coated Fabric-Determination of Abrasion
Resistance |
|
CEN |
EN 438-2
|
Decorative High
Pressure Laminates (HPL); Sheets Based on
Thermosetting Resins; Part 2: Determination of
Properties |
|
CEN |
EN 660-2 |
Resilient floor
coverings - Determination of wear resistance -
Part 2: Frick-Taber Test |
|
CEN |
EN 13329:E |
Laminate floor
Coverings - Specifications, Requirements and
Test Methods |
|
CEN |
ENV 13696 |
Wood and Parquet
Flooring - Determination of Elasticity and
Resistance to Wear |
|
Federal |
Test Method Std.
No. 191A Method 5306.1 |
Abrasion Resistance
of Cloth: Rotary Platform, Double-Head (Taber)
Method |
|
Federal |
Test Method Std.
No. GG-P-455b |
Plates and Foils,
Photographic (Photosensitive Anodized Aluminum) |
|
Federal |
TT-P-0091D |
Interim Federal
Specification - Paint, Rubber Base,
Styrene-Butadiene Type, Interior, for concrete
floors. |
|
Ford |
BN 108-02 |
Resistance to
Abrasion - Taber Abraser |
|
Ford |
BN 108-04 |
Resistance to
Scuffing |
|
Ford |
ESB-M99P14-A1 |
Engineering
Material Specification - Pad Printing, First
Surface Plastic or Painted Plastic, Interior |
|
Ford |
WSS-M15P34-B1
|
Engineering
Material Specification - Performance, Interior
Trim Appliques, High Wear |
|
Ford |
WSS-M15P34-B2
|
Engineering
Material Specification - Performance, Interior
Trim Appliques, Low Wear |
|
Ford |
WSS-M15P4-E
|
Engineering
Material Specification - Interior Trim, Assembly
Performance Specification |
|
General Motors |
GM2751M |
Automotive
Upholstery Fabric |
|
General Motors |
GM9515P |
Abrasion Resistance
of Organic Coatings (Taber Abraser Method) |
|
General Motors |
GM9911P |
Scuff Resistance to
Surface Wear |
|
General Motors |
HN0245 |
Determination of
Resistance to Abrasion |
|
Hyundai/Kia |
MS300-32
|
Abrasion Resistance
of Woven Knits for Automotive Interiors & Trim
|
|
ISO |
3537 |
Road Vehicles -
Safety Glazing Materials - Mechanical Tests |
|
ISO |
4586-2/Amd.4 |
High-pressure
decorative laminates - Sheets made from
thermosetting resins |
|
ISO |
5470-1 |
Rubber or Plastics
Coated Fabrics - Determination of Abrasion
Resistance |
|
ISO |
7784-2 |
Paints and
Varnishes; Determination of Resistance to
Abrasion |
|
ISO |
9352 |
Plastics;
Determination of Resistance to Wear by Abrasive
Wheels |
|
ISO |
10074 |
Specifications for
Hard Anodic Oxidation Coatings on Aluminum and
its Alloys |
|
ISO |
ISO 24338
|
Laminate Floor
Coverings - Determination of abrasion resistance
|
|
JIS |
A 1453 |
Method of Abrasion
Test for Building Materials and Part of Building
Construction (Abrasive-Paper Method) |
|
JIS |
H 8503 |
Methods of Wear
Resistance for Metallic Coatings |
|
JIS |
K 6902 |
Testing Method for
Laminated Thermosetting Decorative Sheets |
|
JIS |
K 7204 |
Testing Method for
Abrasion Resistance of Plastics by Abrasive
Wheels |
|
JIS |
L 1096 |
Testing for Woven
Fabrics |
|
NALFA |
LF-01-2001 |
Laminate Flooring |
|
NASTA |
Manufacturing
Standards and Specifications for Textbooks |
Specifications for
Non-Consumable Soft-Cover Texts - Cover Coating |
|
NEMA |
LD3 - 3.13 |
High Pressure
Decorative Laminates |
|
SAE |
J 365 |
Method of Testing
Resistance to Scuffing of Trim Materials |
|
SAE |
J 948
|
Test Method for
Determining Resistance to Abrasion of Automotive
Bodycloth, Vinyl, and Leather, and the Snagging
of Automotive Bodycloth |
|
SAE |
J 1530 |
Test Method for
Determining Resistance to Fiber Loss, Resistance
to Abrasion and Bearding of Automotive Carpet
Materials |
|
SAE |
J 1847 |
Abrasion Resistance
Testing - Vehicle Exterior Graphics and Pin
Striping |
|
SAE |
J 2394 |
Seven-Conductor
Cable for Abs Power |
|
SAE |
J80
|
Abrasion Resistance
of Automotive Rubber Mats |
|
SIS |
SIS 92 35 09 |
Floor Materials -
Determination of Abrasion Resistance |
|
SIS |
SS EN 438-2 |
Decorative High
Pressure Laminates (HPL); Sheets Based on
Thermosetting Resins; Part 2: Determination of
Properties |
|
SIS |
SN EN 660-2 |
Resilient Floor
Coverings - Determination of Wear Resistance -
Part 2: Frick-Taber Test |
|
SIS |
SS EN 13672
|
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
SIS |
SS EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
SIS |
SS EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
SIS |
SN EN ISO 5470-1 |
Rubber or Plastics
Coated Fabric-Determination of Abrasion
Resistance |
|
Tappi |
T 476 |
Abrasion Loss of
Paper and Paperboard (Taber-type method) |
|
UNI |
UNI EN 660-2 |
Resilient Floor
Coverings - Determination of Wear Resistance -
Part 2: Frick-Taber Test |
|
UNI |
UNI EN ISO 5470 |
Rubber or Plastics
Coated Fabric-Determination of Abrasion
Resistance |
|
UNI |
UNI 9115
|
Furniture: Test for
surface finishes.
Behavior of surfaces to wear abrasion.
|
|
UNI |
UNI 10559 |
Paints and
Varnishes; Determination of abrasion resistance
by the Taber apparatus. |
|
UNI |
UNI EN 13672
|
Surfaces for Sports
Areas - Determination of Resistance to Abrasion
of Non-Filled Synthetic Turf |
|
UNI |
UNI EN 14431
|
Vitreous and
Porcelain Enamels - Characteristics of the
Enamel Coatings Applied to Steel Panels Intended
for Architecture |
|
UNI |
UNI EN 14864
|
Vitreous and
Porcelain Enamels - Enamel Coatings Applied to
Steel for Writing Surfaces - Specification
|
|
United Nations |
ECE Regulation 43 |
Uniform Provisions
Concerning the Approval of Safety Glazing and
Glazing Material |
