SALT SPRAY CORROSION CHAMBER
THERMOSTATIC DOUBLE WALLED AS PER ASTM:B-117 & DIN 50021

KSC 1501

• Corrosion resistant FRP inner body & PVC or powder coated MS outer body.

• Top channel & inclined transparent top lid.

• External heater provides heating.

• Flowmeter feeds measured quantity of  salt solution.

• Air humidifying tower provides saturated preheated air.

• Specially designed spraying system with teflon nozzle.

• Digital temperature

• Iindicator-cum-controller with Pt-100 Sensors.

• Automatic water level controller.

• DC power supply unit.

• Solenoid valve (24VDC) operated flow control system

• Working temperature : 35º / 50º ± 1º C

• Sample racks, sample hanging rods.

• Power : 440V / 3P / 50 Hz AC

• Capacity : 250 / 450 Litre

SALT SPRAY CORROSION CHAMBER THERMOSTATIC
AS PER MODIFIED ASTM : B117

KSC 1502

• Corrosion resistant FRP winer body with top channel & inclined top lid.

• Imported Silica Quartz system solution evaporator.

• Air Humidifying Tower provides saturated preheated air.

• Improved spraying system with teflon nozzle.

• Digital temperature indicator-cum-controllers with Pt-100 Sensors.

• Automatic water & salt solution level controller.

• Working temperature : 35º ± 2º C.

• Sample racks, sample hanging rods.

• Power : 230 V/1P/50 Hz AC.

• Capacity : 250 / 450 Litre.

SALT SPRAY CORROSION CHAMBER THERMOSTATIC
AS PER IMPROVED IS:101 (Pt : 6/SEC:1 METHOD : 4)

KSC 1503

• Perspex sheet body with flat base, top channel & inclined top lid.

• Salt solution heated by imported Silica Quartz system.

• Working temp. : 35º ± 2º C.

• Digital Temp. indicator-cum-controllers with Pt-100 Sensors

• Spraying nozzle, sample racks, sample hanging rods.

• Power : 230V/1P/50 Hz AC

• Capacity : 60 / 80 Panels

SALT SPRAY CORROSION
CHAMBER THERMOSTATIC AS PER Improved IS : 2074

KSC 1504

• Perspex sheet body with flat base and solution bath.

• Flat / angular top lid.

• Salt solution heated by imported Silica Quartz system.

• Working temperature 35º ± 2º C.

• Digital temp. indicator-cum-controller with Pt-100 Sensor.

• Spraying nozzle, sample tray, sample hanging system.

• Power : 230V/1P/50 Hz AC

• Capacity : 16 /24 panels

SALT SPRAY CORROSION CHAMBER AS PER IS : 2074

KSC 1505

• Perspex sheet body with inclined base.

• Flat /angular top lid.

• Spraying nozzle, Sample tray & Baffle wall.

• Capacity : 10/16/24 panels.

EVALUATION OF STRESS CORROSION CRACKING RESISTANCE OF
METALS & ALLOYS BY ALTERNATE IMMERSION APP.AS PER ASTM : G-44

KSC 1506

• Stainless steel salt solution bath.

• Movable rack for immersing sample in solution and lifting it out of it.

• Rate of immersion and air drying of soaked sample is prefixed.

• Air circulation is provided throughout the drying period.

• Working temperature 27º ± 1ºC. with provision for adding prechilled salt solution when room temperature is above 25º C.

• Top lid  to maintain uniform inside climate throughout the working cycle.

• Power : 230 V / 1 P / 50 Hz AC.

CONDUCTING MOIST SULPHUR APPARATUS AS PER ASTM : G-87

KSC 1507

• Closed stainless steel bath for heating.

• Perspex Test Chamber with sample racks.

• Top channel & gas tight inclined top lid.

• Digital temperature indicator-cum-controllers.

• Automatic water level controller.

• Gas generator for SO₂.

• Sample hanging system.

• Power : 230 V / 1P / 50 Hz AC.

RESISTANCE TO APPLIED VOLTAGE TEST APPARATUS
AS PER IS: 13620 (SECTION : A-3)

KSC 1508

• Determines electro-chemical stress on bonded coating.

• Assess integrity of coating on steel.

• Control unit having digital voltmeter & ammeter.

• Test Vessel made of perspex.

• Reinforced sample rods are used as cathode & anode.

• Uses 7% NaCl solution.

• Power : 230V / 1P / 50 Hz AC.

CATHODIC DISBONDMENT TEST APPARATUS
AS PER ASTM : 775A / 775M (ON STEEL)

KSC 1509

• Tests insulating coatings by accelerated procedure.

• Control unit having digital voltmeters & ammeter.

• Platinum electrode anode.

• Reference electrode & reinforced sample cathode.

• Test Vessel made of perspex.

• Uses 3% NaCl solution.

• Power : 230 V/1P/50 Hz AC .

PAINT CORROSION CABINET (HUMIDITY CABINET)

KSC 1511

• Control & Indication by Digital L.E.D. Display Temp.

• Indicator-cum-automatic Controller having Calibration Certificate traceable to National Standards.

• Temp. Cycle 42º to 48º C & back to 42º C.

• Suitable for 12/24/48 Panels

• Interior made of S. S. & exterior nicely painted.

NOTE: FOR IMPORTED ERICHSEN GERMAN MAKE SALT SPRAY CORROSION CHAMBER, HUMIDITY CABINET, KESTERNICH CHAMBER (SULPHUR DIOXIDE CYCLIC CORROSION CABINET) KINDLY REFER ERICHSEN IN THE IMPORTED SECTION.