AMTEC, Germany Laboratory Car Wash for determining the Scratch Resistance of Coatings

Download Brochure

CHEMINSTRUMENTS, USA Adhesion/Release testing machine with digital display is designed to perform PSTC, ASTM, TLMI, FINAT and AFERA adhesion and release testing procedures.

CHEMINSTRUMENTS, USA 90/180 Deg. Peel Adhesion Tester Get precision measurements for 90° /180° peel tests with the ChemInstruments 90° /180° peel adhesive testing machine. The 90° peel adhesive tester runs at varying speeds for added flexibility and offers a number of additional features.

Download Brochure

CHEMINSTRUMENTS, USA 8 /10/30 Room Temperature Bank Shear Tester For performing room temperature shear tests according to a number of procedures, the ChemInstruments Room Temperature 30 Bank Shear Tester is an ideal solution. It performs shear tests according to PSTC-7 Procedure A, TLMI Test No. 7 and ASTM D 3654, Procedure A for holding power of pressure sensitive tapes. It can also be used for PSTC-14, adhesion of pressure sensitive tape to fiberboard at 90° angle and constant stress.

Download Brochure

Download Brochure

CHEMINSTRUMENTS , USA Loop Tack Tester
Quickly and efficiently determine the tack or "grab" of an adhesive with the ChemInstruments Loop Tack Tester. This compact tack testing machine meets the ASTM and TLMI specification.

CHEMINSTRUMENTS, USA Hot Melt Coater/ Laminator The Hot Melt Laboratory Coater / Laminator is a precision laboratory bench top hot melt coating and laminating system capable of producing coated and laminated samples of hot melt adhesives on foils, films, papers and other web based materials. Lab scale simulations of production processes can be easily set up and studied

CHEMINSTRUMENTS, USA Benchtop Laminator
Compact and simple to operate, the Benchtop Laboratory Laminator is durable enough for laboratory or production use. The Benchtop Laboratory Laminator can consistently reproduce laminated samples that are ready for testing day after day. The simple controls allow for quick work and can accommodate a wide range of materials to be laminated including papers, films, foils, and many other materials. This laminating system is very versatile and is one of a handful of devices that are a must for any development or QC laboratory.

CHEMINSTRUMENTS, USA Rolling Ball Tack Tester Fast and economical, the ChemInstruments Rolling Ball Tack tester provides an easy method of testing the tack of an adhesive. It quantifies the ability of an adhesive to quickly adhere to another surface. The Rolling Ball Tack tester meets the standards set by the Pressure Sensitive Tape Council (PSTC-6) and ASTM (ASTM D3121) for tack testing a pressure sensitive adhesive.

COESFELD, Germany
Portable Tension Tester Model MTT 1500 for pipeline coating tensile strength tester.

COESFELD, Germany
Cathodic Disbonding Tester for pipeline industry (16 measuring station)
 

CO.FO.ME.GRA, Italy Solar Box 3000e RH weatherometer for weathering resistance test.

DEFELSKO, USA
New Series of Positector 6000 Standard & Advanced Models
 

DEFELSKO, USA
New Positest AT Pull Off Adhesion tester fully Automatic Model Positest AT-A digital display.
 

DEFELSKO, USA
UTG-ME for through paint metal thickness measurement.
 

DELMHORST, USA Paper Moisture Meter P 2000

DELMHORST, USA Wood Moisture Meter BD-2100

DELMHORST, USA Soil Moisture Meter KS-D1

DELMHORST, USA Cotton Moisture Meter C-2000

HANATEK, UK Advanced Co-efficient of Friction (C.O.F.) Tester Model : AFT microprocessor based computerized Model.

ERICHSEN, GERMANY The compact material testing machines of the UNIMAT® PLUS serie have been specifically designed to facilitate goods acceptance inspections and quality checks simply and fast. Their robust construction
also makes them suitable for in-process controls as well as for tensile and pressure tests. Together with the integrated measuring system PHYSIMETER® 906 MC-E plus force transducer, these machines comply with the current standards ISO 7500-1, EN 10002-4 and EN 10045-2 for tensile testing machines and meet the standards and regulations relating to CE qualification..

ERICHSEN, GERMANY Universal Sheet Metal Testing Machines

ERICHSEN, Germany New Model of Scratch Hardness Tester LINEAR TESTER 249 optimised scratch hardness tester is intended, in addition to its original purpose of application, i. e. to establish the ability of a surfaces to resist damage by scratching, also for several other tests:

• Scribe/Scratch tests

• To and fro-cycle abrasion tests

• Crockmeter tests

• MEK tests, tests determining the resistance against solvents in general or wipe test, respectively.

ERICHSEN, Germany Scratch Test Station acc. To BMW/ERICHSEN Model 450 is a PLC controlled test system for the execution of scratch resistance tests on lacquered and plastic surfaces.

ERICHSEN, Germany New Model of Lacquer & Paint Test Machine 202EM Hydraulic Machine converted into motorized.

ERICHSEN, Germany Paint Borer Model 518 S is a very compact instrument. All the principal components - the drilling device, the measuring microscope, the specimen illumination and the battery - are enclosed in a sturdy housing. A slide moving on horizontal slide-ways houses the drill and microscope and gives the PAINT BORER 518 S its particular feature: the instrument itself does not have to be moved for measuring after drilling.

ERICHSEN, Germany New Model of Thickness Gauge PAINTXPLORER 548 has been developed to extend the range of the application of the PAINT BORER 518 S, especially targeting sensitive drillings, particularly into rigid/brittle materials. It is possible that, already at minor eccentric irregular running of the drill used or of its centre axle, such materials can be subject to breaking off of the cutting edges including chipping off, leading afterwards during the optical measurement with the microscope also to limitedly definable transitions between the layers to be measured.

ERICHSEN, Germany Scratch Hardness Tester 430P Is a motor-driven universal testing instrument designed for carrying out a wide range of tests on varnished and plastic surfaces to determine their resistance to scratches and cuts. Single cuts, parallel cuts and - by turning the specimen by 90° - cross-cuts can be applied to test panels of various thicknesses.

ERICHSEN, Germany Stone Hammer Blow Testing Instrument acc. to SAE, MULTI GRIT TESTER 508 SAE Electro-pneumatically controlled multi-blow test instrument. This is a stone hammer blow testing instrument equipped with an adjustable impact angle, contrary to the execution of VDA.

ERICHSEN, Germany Film Applicator and Drying Time Recorder (2 IN ONE) COATMASTER 510 Microprocessor controlled Film Applicator and Drying Time Recorder, with free adjustable drawing-down speed in the range of 0.1 - 19.9 / 20 - 100 mm/s as well as free adjustable dryness test time in the range of 0.1 - 19.9 / 20 - 108 min/cm, with integrated ejector (vaccum function to fix the substrates using by vacuum suction plates

ERICHSEN, Germany PICOGLOSS 560 MC-S Extremely small, convenient Gloss Measuring Device with remarkably small measuring aperture.

ERICHSEN, Germany PICOGLOSS 503 three-angle gloss meter 20°/60°/85°

ERICHSEN, Germany Corrosion Testing Apparatus, Model 606/400-Basic, compact design, to carry out different salt spray and condensate water tests, with integrated control unit, 400 l test chamber volume.

ERICHSEN, Germany Sheet Metal Testing Machine with electro-hydraulic drive, fully automatic test sequence and switch off at specimen failure, max. drawing forces 200 kN or 400 k

ERICHSEN, Germany Material Testing Machine Model : UNIMAT PLUS 050-2kN , 052-5kN , 054-10kN , 054-20kN Electrically driven testing machine for testing forces of 2 Kn / 5kN / 10kN / 20kN.

HOOVER, USA Automatic Pigment Muller M-5
Developed to eliminate the tedious labor and uncertain results of the manual mulling of pigments being used universally throughout the color, cosmetic, plastic and electronic , chemicals industries ,and because of its accuracy and ease of operation, it has become an integral part of laboratory testing procedures.
 

LITTLE JOE, USA Draw Down Machine to get more consistent use of grind gages using the ADM automatic automatic draw down machine from Little Joe Industries. Compare the benefits of the ADM to using grind gages manually:

• Removes operator variables.

• Smooth motorized scraper movement.

• Rigidly held scraper provides consistent scraper angle.

• Consistent and accurate scraper force adjustable from 1.75 to 6 Kgs (3.5 to 13 pounds).

• Allows less operator training and supervision on proper grind gage use.

• Uses existing grind gages and scrapers from your current supplier.

LITTLE JOE, USA Offset Proofing Press used mostly by lithographic ink makers, UV flexo ink makers, and printers to check the color of their ink formulations the Little Joe is also used for research and development, and quality control by the ink maker.

Suppliers to the ink industry such as pigment manufacturers can check their raw materials by printing samples of ink made with their product.
Companies who sell other products to the ink and printing industries such as paper and overcoat varnish manufacturers can also benefit by checking their own products and how they interact with ink on the printed sheet.

MASTRADE, UK TRRL TYPE SKID-FRICTION TESTER TR300 for Road Marking Paints Non-slip Test

RAL, Germany
i) RAL-Design System for Color Matching.
ii) RAL E3 - contains all 490 RAL EFFECT
iii) RAL E4- ALL 70 RAL EFFECT metallic colours
iv) RAL E-2 Multifunctional double colour fan deck with all 490 RAL EFFECT colours

• 420 solid colours and 70 metallic colours

• solid colours are based on waterborne paint systems, metallic colours are based on acrylic paints

• fan deck size 21.0 x 5.0 cm, solid colours 5.0 x 2.5 cm, metallic colours full page

• solid and metallic colours can be viewed jointly or separately

• solid colours semi matt, metallic colours high gloss

v) RAL-PLASTIC is the RAL colour standard for plastics. To begin with, 100 colours were translated into a dedicated RAL plastics standard using a sophisticated technical process

RHOPOINT, UK NEW IQ for Distictness of Image Test Model : IQ20/60/85 & IQ 20/60 used in Paints & Coatings Manufacturers and Applicators

• Metal Polishers

• Powder Coaters

• Plastics Manufacturers

• Inks and Printing

• Additives Manufacturers

• Automotive Industry

• Wood Coatings

• Coil Coaters

• Yacht Manufacturers

RHOPOINT, UK MFFT BAR (Minimum Film Forming Temperature App.)

TQC, Holland
Oven Temperature Logger (Traveling type) Model  Curve X-2
 

TQC, Holland
Bresle Test Kit & Bresle Patches
 

TQC, Holland
SPRING LOADED ROLLER FOR DUST TAPE TEST
The Spring Loaded Roller is used to perform objective dust tape tests, as mentioned in ISO 8502-3, and eliminates the human factor.
 

TQC, Holland
Optical Inspection Tools
Ideal for visual inspection of hard-to-reach spots. Spots that are difficult to inspect are even more difficult to blast or coat. With a simple inspection mirror a visual inspection behind stiffeners, under- or on top of I-beams or other awkward places is easy to perform.

Visual inspections demand proper lighting. Dependent on the circumstances the need for light can vary from extremely bright or just moderate direct light, floodlight, white light or UV etc. Surface cleanliness, marks, pinholes, fish-eyes, delaminating, cracks and many other coating defects require further

investigation to find their cause. A portable microscope allows the inspector to examine coating defects right on the spot.

Some microscopes are equipped with a reticle so direct measurements can be made. An optional camera adapter that is available for certain types allows to make clear digital images which are ideally to illustrate inspection reports or to discuss a defect with other parties.
 

TQC, Holland
ILLUMINATED USB MICROSCOPEB
Handy, Portable, Inexpensive & Light Weight Microscope which can be connected to the PC. with the unique optical design, the USB Microscope combines a digital camera, precision optics and LED lighting in the microscope.
 

QUALITEST, Canada Digital Display Buchholz Hardness Tester FL 2000H (first of its kind in world)

VISCOTECH, Spain Automatic Stormer (Krebs) Viscometer

VLM, Germany Fully Automatic Computerised Kesternich Cabinet CON 400-S A-KES

ZEHNTNER, Switzerland Retroreflectometer
ZRM 5070 for Road Marking Paints, Road studs, Fluorescent , Neon signs etc.