Testing machines for all types of sheet metal
testing.
As the world's leading manufacturer of sheet metal testing machines,
we ensure that our experience and knowledge is incorporated into the
development of all our products.
The result is perfected, innovative machines with excellent long term
stability which need only a minimum of maintenance. Our products
meet global requirements on testing technology and exceed
international demands on accuracy. The ERICHSEN Manufacturer's
Certificate M (conforming to DIN 55 350, Section 18) is our response
to the control of inspection, measuring and test equipment required
by DIN EN ISO 9000. All our standard test equipment can be supplied
with this certification which ensures full traceability through
product identification. The functions and measured values of the
basic machine are checked using calibrated measuring equipment and
are documented in an inspection report. It is also possible to have
used deep-drawing tools reworked and recertified by us. We will be
delighted to advise you in our modern show rooms where you can
convince yourself of our competence. Consult us in all questions
concerning testing – especially if you need customized solutions.
Sheet Metal Marking
The following pages contain brief descriptions of our products for use in sheet metal marking.
for electro-chemical application of measuring grids on sheet metal blanks intended for forming applications. power supply unit in portable metal housing, including one set of cables with connecting clamps.
Mains supply: 230 V AC, 50 Hz, max. 1.5 kW
Working voltage: approx. 18 V DC and 15 V AC
with electro-hydraulic drive, max. blanking force of 500 kN, design and application in accordance with Technical Description 150/E, including setting up of blanking tool mentioned below and ordered separately with the machine. Power supply: 400 V, 3-phase, 50 cycles, 4 kW Dimensions: 640 x 850 x 1650 mm. The quantity required of hydraulic oil (50 l), type HLP
32 in accordance with DIN 51 524-P2, must be provided by
the user.
with electro-hydraulic drive, max. blanking force of 1000 kN, design and application in accordance with Technical Description 150/E, including setting up of blanking tool mentioned below and to be ordered separately with the machine. Power supply: 400 V, 3-phase, 50 cycles, 7.5 kW Dimensions: 1200 x 1050 x 2000 mm.
to remove blanking burrs and the work hardened edge of tensile specimens made of flat material. For full details of the features of the milling machine and its applications, see Technical Description 160/E. Supplied with two carbide cutters, but excluding milling clamp. Mains supply: 230 V AC, 50 Hz, 0.5 kW.
Operated manually, max. drawing force of 30 kN and sheet holder adjustable to achieve a constant force of 10 kN, with depth of indentation on digital display to 1/10 mm accuracy. The testing machine including test tool no. 27 according to DIN 50 101.
For the determination of drawing quality of sheet and strip metal 0.1 - 1.5 mm thick (based on a tensile strength of 400 N/mm² ) in widths from 13 - 90 mm, using the:
Erichsen Cupping Test to ISO, EURONORM, BS, DIN, NF, GOST, UNI, UNE
Electro-hydraulic sheet metal testing machine with automatic test sequence
for the determination of the ductility and drawing quality of sheet and strip using the following tests:
I. Erichsen Cupping Test according to EN ISO, EURONORM, DIN, BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing operation,
III. Deep Draw Bore Expanding Test acc. to Siebel and Pomp (KWI).
The testing machine is equipped with automatic stop at specimen failure. Design details and testing facilities in accordance with the Technical Description 102/E. The machine is supplied with Test Tool No. 27 according to EN ISO 20482 and with one filling of hydraulic oil.
for measuring the residual deformation capacity of stamping lacquers by drawing a bead in the wall of a standard 33 mm Ø cup, and measuring the depth of the bead to an accuracy of 0.01 mm.
for rapid measurement of ears
formed on cylindrical cups of diameters from 15 to 50
mm. The heights of the ears and valleys are measured and
are displayed as a percentage and in millimeters by
simple placing of the cup on the location of the
instrument. The measuring resultis displayed on digital
display when a push-button is operated.
for rapid measurement of ears
formed on cylindrical cups of diameters from 51 to 100
mm. The heights of the ears and valleys are measured and
are displayed as a percentage and in millimeters by
simple placing of the cup on the location of the
instrument. The measuring resultis displayed on digital
display when a push-button is operated.
with electro-hydraulic drive, max. drawing force of 45 kN and with an automatic stop facility and delay function, includes one Test Tool No. 27 according to DIN 50 101 as well as one filling of hydraulic oil.
For testing all kinds of sheet and strip metal using the Erichsen Cupping Test in accordance with: ISO, EURONORM, DIN, BS, NF, GOST, UNI, UNE, ICONTEC, IS, BM, SIS, TGL, MSZ.
for axial measurement of
deep-drawing cups and raw cans of diameters of 33, 50,
75 or 100 mm at maximum height of 210 mm of deep-draw
cups.
The specimen is fastened to the turntable by a magnet
and centered by coordinated pins. Measuring is a fully
automated process in which the measuring wheel works
pneumatically. All real-time processes of the
measurement and the automatic test sequence are executed
inside the instrument. Visualisation and evaluation
procedures which are not real-time relevant, are
relocated via network on a separate PC.
The scope of supply includes:
software,
PC and
VDU.
with electro-hydraulic drive, max. drawing force of 45 kN and with an automatic stop facility and delay function, includes one Test Tool No. 27 according to DIN 50 101 as well as one filling of hydraulic oil.
For testing all kinds of sheet and strip metal using the Erichsen Cupping Test in accordance with: ISO, EURONORM, DIN, BS, NF, GOST, UNI, UNE, ICONTEC, IS, BM, SIS, TGL, MSZ.
Universal Sheet Metal Testing Machine, Model 142-20-Basic
with electro-hydraulic drive, max. drawing force 200 kN and forcre-setting the blank holder pressure of max. 40 kN, for testing sheets and strips of all types for the properties important for press working, stretch and deep drawing quality using the:
I. Erichsen Cupping Test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing operation,
III. Deep Drawing Bore Expanding Test acc. to Siebel and Pomp (KWI),
IV. Bore Expanding Tests acc. to ISO 16630,
V. Tools for Determination of Forming Limit Curves (FLC) acc. to ISO 12004
Universal Sheet Metal Testing Machine, Model 142-20
with electro-hydraulic drive, max. drawing force 200 kN and for pre-setting the blank holder pressure max. 100 kN, for testing sheets and strips of all types for the properties important for press working: stretch and deep drawing quality using the:
I. Erichsen Cupping Test acc. to EN ISO, EURONORM, DIN, BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing operation,
III. Deep Drawing Bore Expanding Test acc. to Siebel and Pomp (KWI),
IV. Bore Expanding Tests acc. to ISO 16630,
V. Tools for Determination of Forming Limit Curves (FLC) acc. to ISO 12004.
Universal Sheet Metal Testing Machine, Model 142-40-Basic
with electro-hydraulic drive,
max. drawing force 400 kN and for pre-setting the blank
holder pressure of max. 100 kN, for testing sheets and
strips of all types for the properties important for
press working, stretch and deep drawing quality using
the:
I. Erichsen Cupping Test according to EN ISO, EURONORM,
BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing
operation,
III. Deep Drawing Bore Expanding Test acc. to Siebel and
Pomp (KWI),
IV. Bore Expanding Tests acc. to ISO 16630,
V. Tools for Determination of Forming Limit Curves (FLC)
acc. to ISO 12004,
Universal Sheet Metal Testing Machine, Model 142-40
with electro-hydraulic drive, max. drawing force 400 kN and for pre-setting the blank holder pressure of 220 kN, for testing sheets and strips of all types for the properties important for press orking: stretch and deep drawing quality using the:
I. Erichsen Cupping Test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing operation,
III. Deep Drawing Bore Expanding Test acc. to Siebel and Pomp (KWI),
IV. Bore Expanding Tests acc. to ISO 16630,
V. Tools for Determination of Forming Limit Curves (FLC) acc. To ISO 12004,
Universal Sheet Metal Testing Machine, Model 145-60
with electro-hydraulic drive, max. drawing force 600 kN and for pre-setting the blank holder pressure of max. 600 kN, proportioning valve control of sheet holder force and drawing punch speed, for testing sheets and strips of all types for the properties important for press working: stretch and deep drawing quality using the:
I. Erichsen Cupping Test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing operation,
III. Deep Drawing Bore Expanding Test acc. to Siebel and Pomp (KWI),
IV. Bore Expanding Tests acc. To ISO 16630,
V. Tools for Determination of Forming Limit Curves (FLC) acc. to ISO 12004
Universal Sheet Metal Testing Machine, Model 145-100
with electro-hydraulic drive, max. drawing force 1000 kN and for pre-setting the blank holder pressure of max. 1000 kN, proportioning valve control of sheet holder force and drawing punch speed, for testing sheets and strips of all types for the properties important for press working: stretch and deep drawing quality using the:
I. Erichsen Cupping Test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing operation,
III. Bore Expanding Tests acc. To ISO 16630,
IV.Tools for Determination of Forming Limit Curves (FLC) acc. to ISO 12004,
Universal Sheet Metal Testing Machine, Model 146-60
with electro-hydraulic drive,
max. drawing force 600 kN, for pre-setting the blank
holder pressure of max. 600 kN and additional sheet
holder force, proportioning valve control of sheet
holder force and drawing punch speed, for testing sheets
and strips of all types for the properties important for
press working: stretch and deep drawing quality using
the:
I. Erichsen Cupping Test according to EN ISO, EURONORM,
BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing
operation,
III. Deep Drawing Bore Expanding Test acc. to Siebel and
Pomp (KWI),
IV. Bore Expanding Tests acc. To ISO 16630,
V. Tools for Determination of Forming Limit Curves (FLC)
acc. to ISO 12004
Universal Sheet Metal Testing Machine, Model 146-100
with electro-hydraulic drive,
max. drawing force 1000 kN and for pre-setting the blank
holder pressure of max. 1000 kN, proportioning valve
control of sheet holder force and drawing punch speed,
for testing sheets and strips of all types for the
properties important for press working: stretch and deep
drawing quality using the:
I. Erichsen Cupping Test according to EN ISO, EURONORM,
BS, NF, GOST, UNI, UNE,
II. Deep Drawing Cup Test in a first and a redrawing
operation,
III. Bore Expanding Tests acc. To ISO 16630,
IV.Tools for Determination of Forming Limit Curves (FLC)
acc. to ISO 12004
Universal Sheet Metal Testing Machine, Model 146-100
to carry out the hydraulic deep
drawing test on all ferrous and non-ferrous metals.
Maximum bulge diameter 200 mm, maximum bulge force 1000
kN, maximum blank holder force 1000 kN. The blank holder
force and speed of the bulge piston are infinitely
variable, and the clamping stroke is 180 mm. Working
cylinder, drive, hydraulic and electrical equipment as
well as measuring and safety installations are all
housed within the body of the machine.
