Whatever you want to perform:
material tests, ageing of computer chips, run complex
experiments with highly sensitive loads, drying or
tempering electronic components, hardening plastic resin
or heating plasticine. Our U universal oven stands for
unparalleled precise, even and gentle temperature
control.
In the laboratory, our incubator
is ideal for all applications with temperatures up to
+70°C – specifically for incubating living cultures at
+37 °C. Thanks to the finely-tuned control technology,
critical temperature overshoots are completely ruled
out, valuable loads are therefore warmed up particularly
carefully.
Our steriliser S complies with all relevant standards
and regulations for medical products and guarantees
reliable programme sequences, irrespective of the load
and chamber volume. The validation of a Memmert hot air
steriliser is possible anytime, as our exemplary process
validation by an independent, accredited test institute
shows.
The pass-through oven UFP 800 TS is based on our
standard oven of the highest controller class Perfect
and thus offers all technological highlights, such as
the heating adapted to the specific product and the
perfectly tuned control technology. However, as these
units have to be adapted to meet users' specific
demands, please get in contact with our experts for
individual solutions myAtmoSAFE. We will commonly find
the optimum solution for your application.
Five model sizes, for high-precision temperature control
of the embedding medium, such as paraffin or wax in
science, research and forensics. The range of functions
and thermal safety of our paraffin oven UNE PA are
designed specifically for an absolutely reliable sample
preparation in the laboratory. Your benefits? An optimum
cost/benefit ratio for an appliance that guarantees, for
many years, precise and even temperature control for
embedding medium without any loss in quality whatsoever.
With short warming up times, high-precision temperature
control and turbo-drying, the vacuum oven VO shows off
all its strength – at the same time it can handle
heat-sensitive or oxygen-sensitive substances and
materials such as cosmetics, food, clocks, books or PCBs
and other electronic components with unparalleled
gentleness when drying. The direct contact between
chamber load and the heatable and removable thermal
shelves guarantees in all vacuum oven VO models a quick
and even temperature control without loss of heat.
Excellent controllability, extremely small control
fluctuations, low-vibration operation and impressive
energy savings provide the added value from this perfect
adaptation of Peltier technology. With its extensive
range of appliances with Peltier elements for heating
and cooling – such as the IPP Peltier-cooled incubator,
the HPP constant climate chamber, the Storage Chamber
IPS and the Peltier-cooling unit for waterbaths –
Memmert is the market leader in this technologically
sophisticated segment.
Our ICP compressor-cooled incubator offers great
results whenever a rapid and precise changeover between
heating and cooling phases in ramp operation is
required. Due to the finely tuned control technology,
temperatures exactly reach the setpoint values without
the need for energy-intensive bursts of power.
Cell cultures, tissue cultures and bacteria cultures, as
well as micro-organisms, need protection in a controlled
and physiologically ideal environment.
Alarm functions, three-fold overtemperature protection
and simultaneous display of all parameters provide
safety for samples and cultures in medicine, life
science, environmental technology, bacteriology,
virology, biology, biotechnology and zoology.
Why optimise the performance of a cooled incubator
unnecessarily for rapid changes in temperature? The IPS
temperature control storage chamber exactly meets the
requirements of the food or cosmetics industry,
medicine, pharmaceutics for storing samples at constant
temperatures: absolute reliability, precision and
durability, and particularly environmentally friendly at
the same time.
Does your application temperature lie between 8 °C above
room temperature and 90°C, with controllable humidity?
Then the Memmert humidity chamber HCP is unbeatable in
price, performance and comfort. The almost unlimited
programming possibilities of temperature profiles make
ideal environmental conditions for the load possible.
Are you looking for an appliance for environment
simulation and long-term material tests which is quiet,
space-saving, environmentally friendly and at the same
time extremely economical? Then choose the innovative
Peltier technology in the HPP constant climate chamber
for stable and precise long-term tests. The temperature
control from +5 ºC to +70 ºC, as well as the active
humidification and dehumidification from 10% to 90% rh,
are optimally tuned to the requirements of on-going
stability tests for the manufacturers of pharmaceutical
products.
Rapid, precise and energy-saving temperature changes in
the range from -42 ºC to +190 ºC, along with fast
humidity recovery times, make the TTC temperature test
chamber and the CTC climatic test chamber with humidity
unit a perfect duo for controlled material testing,
function tests, ageing tests or climate tests on
composites, concrete, plastics or electronic components
in material technology, the automotive and aerospace
industries, and electronics.
The Memmert waterbath is available in six model sizes
and two performance classes. In addition to the Basic
class for standard temperature control tasks, the
Excellent version provides precise test procedures with
a maximum of safety: electronic overtemperature control
and a wide range of visual and acoustic signals; for
example if the filling level is too low, for
overtemperature, but also for input acknowledgement or
to signalise the end of the programme. In the largest
model, an optional circulation pump provides an even
better thermal uniformity of the water.
