Imported Laboratory Instruments

Laboratory Instruments for Testing
 


 

EXCLUSIVE DISTRIBUTOR OF DEFELSKO PRODUCTS IN INDIA.
 

 

Posipen Coating Gage

Measures non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel.

PosiPen can be placed with pin-point accuracy on any location of the part to be measured which other Gages are not able to reach. PosiPen measures:

  • on hot surfaces
  • on small surfaces
  • in different positions

PosiPen has a very small, unique magnet and therefore can measure on extremely small parts, on peaks and valleys.

Each PosiPen has two scales, mils (inch) and microns (metric)

Range: 0.25 to 20 mils (inch) Tolerance ±10% and 0.1 mil
  5 to 500 microns (metric) Tolerance ±10% and 2.5 microns

Each PosiPen is calibrated to NIST calibration standards (Certificate included) and conforms to national and international standards.

PosiPen is manufactured in two versions:

  • PosiPen Model A for measurements on surfaces with normal temperatures.  
  • PosiPen Model B for measurements on surfaces with extreme temperatures.
    (between -150°F and + 450°F • between -100°C and+230°C)
  • Posipen Model C for comparing ferrite content to a known value.

Triple Indicator:
  • Use the red/silver joining line when the Gage is horizontal (walls).  
  • Use the green line when the Gage is pointing straight down (green/ground).
  • Use the blue line when the Gage is pointing straight up (blue/sky).  
    •

Easy to Use:

Place the tip of the PosiPen on the coated surface and allow the magnet to contact. Pull the PosiPen straight from the object to be measured while keeping close watch on the appropriate indicator. Note the reading when the magnet releases.

Easy to Carry:
Just like a ball point pen, it is always there when you need it!

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTector 2OO

Overview: Non-destructively measures a wide variety of applications using proven ultrasound technology. Measures coating thickness over wood, concrete, plastics, composites and more. Advanced models measure up to 3 individual layer thicknesses in a multi-layer system and features a graphic readout for detailed analysis of the coating system.

Advanced Model measures up to 3 layers with graphics

Simple

  • Ready to measure - no adjustment required to measure most coatings
  • Menu-driven user interface
  • One-Handed menu navigation
  • Bi-color indicator light - ideal in a noisy environment
  • RESET feature instantly restores factory settings

Durable

  • Solvent, acid, oil, water and dust resistant - meets or exceeds IP5X ingress protection   
  • Scratch/Solvent resistant display suitable for harsh environments
  • Shock-absorbing, protective rubber holster with belt clip
  • Two year warranty on both gage body and probe

Accurate

  • Responsive transducers provide fast, accurate readings (up to 40 readings/minute)
  • Proven non-destructive ultrasonic technique conforms to ASTM D6132 and ISO 2808
  • Certificate of calibration showing traceability to NIST included

Versatile

  • Continually displays/updates average, standard deviation, and number of readings while measuring
  • Internal memory stores up to 10,000 readings in up to 1000 batches
  • Built-in clock to date and time stamp each stored measurement
  • USB, IR and serial output options for simple communication with printers and PCs
  • Backlit display for dim or dark environments
  • Mils/Microns switchable
  • Selectable display languages including: English, Spanish, French, German, Portuguese, Chinese, Japanese, Norwegian, Russian, Czech and Italian 

     

    •
Range 25 -1000 µm
Resolution 2 µm
Accuracy +(2 um and 3% of reading)
Measurement Rate 45 readings/min

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTector 6000 Series

All Gages Feature...

Simplicity

  • Ready to measure-no calibration adjustment required for most applications
  • One-Handed menu navigation
  • Bi-color indicator light-ideal in a noisy environment
  • RESET feature instantly restores factory settings

Durability

  • Solvent, acid, oil, water and dust resistant-meets or exceeds IP5X ingress protection
  • Wear-resistant probe tip
  • Thick, impact and scratch resistant Lexan® display suitable for harsh environments
  • Protective rubber holster with quick-release belt clip and probe storage
  • Two (2) year warranty

Accuracy

  • Certificate of Calibration showing traceability to NIST included
  • Built-in temperature compensation ensures measurement accuracy
  • Hi-RES mode increases displayed resolution for use on applications that require greater precision
  • Conforms to national and international standards including ISO and ASTM

Versatility

  • Multiple calibration adjustment options including 1 point, 2 point, known thickness and average zero
  • Calibration Lock
  • SSPC PA2 feature set determines if film thickness over a large area conforms to user-specified min/max levels (memory (3) gages only)
  • Selectable display languages
  • Flip Display for right-side-up viewing
  • Backlit display for dim or dark environments
  • Mils/Microns/mm switchable
  • Extended cables available (up to 250 ft/75 m) for remote measuring
  • All PosiTector 6000 Gages are available in your choice of Basic, Standard and Memory configurations.

Basic (1) Models

  • All basic features

Standard (2) Models
All Basic (1) Gage features plus...

  • Storage of up to 250 readings 
  • Continually displays/updates average, standard deviation, min/max thickness and number of readings while measuring
  • HiLo alarm audibly and visibly alerts when measurements exceed user-specified limits
  • Built-in IR port for printing to optional wireless printer
  • USB port for simple connection to a PC
  • Optional PosiSoft software available for downloading readings to a PC for charting and graphing
  • Optional serial output cable for data collectors

Memory (3) Models

All Basic (1) and Standard (2) Gage features plus...

  • Storage of 10,000 readings in up to 1000 batches—stored readings can be sub-grouped, viewed, updated or deleted
  • Built-in clock to date and time stamp each stored measurement
  • SSPC-PA2 feature determines if film thickness over a large area conforms to user-specified min/max levels
  • Multiple stored calibration adjustments for measuring on a variety of substrate conditions
  • Supplied with PosiSoft software and USB cable

 

 

PosiTector
6 OOO Series
ordering guide 		Our most popular built-in and Regular separate probe models 90'
Regular probe tor tight spots 		Ideal for anodized

aluminum

Micro probes -Our smallest probes for small parts or hard-to-reach areas Built-in and Separate probes for thick protective coatings; epoxy, rubber, tntumescent (ire proofing and more

Non-Magnetic Coatings over FERROUS Metals (Steel & Iron)

Basic F1 FS1 FRS1   F0S1 F45S1 F90S1 FT1 FTS1 FKS1
Standard F2 FS2 FRS2   F0S2 F45S2 F90S2 FT2 FTS2 FKS2
Memory F3 FS3 FRS3   F0S3 F45S3 F90S3 FT3 FTS3 FKS3

Non-Conductive Coatings on NON-FERROUS Metals (Aluminum, Copper, etc.)

Basic N1 NS1 NRS1 NAS1 N0S1 N45S1 N90S1     NKS1
Standard N2 NS2 NRS2 NAS2 N0S2 N45S2 N90S2     NKS2
Memory N3 NS3 NRS3 NAS3 N0S3 N45S3 N90S3     NKS3
Combination ALL METALS Basic FN1 FNS1 FNRS1           FNTS1  
Standard FN2 FNS2 FNRS2           FNTS2  
Memory FN3 FNS3 FNRS3           FNTS3  
Range

0-60 mils
 0-1600µm

0-25 mils
0-625 µm

0-250 mils
0-6 mm

0-500 mils
0-13

Accuracy ±(0.05 mils + 1%) 0-2 mils
 ±(0.1 mils + 1%) > 2 mils

±(1 µm + 1%)0-50 µm
±(2 µm + 1%)>50 µm		 ±(0.02 mils + 1%) 0-4 mils
±(0.1 mils + 3%) > 4 mils

±(0.5 µm + 1%)0-100 µm
±(2 µm + 3%)>100 µm		 ±(0.5 mil + 1%) 0-100 mils
±(0.5 mil + 3%) > 100 mils

±(0.01 mm + 1%)0-2.5 mm
±(0.01 mm + 3%)>2.5 µm		 ±(1 mil + 3%) 0-500 mils

±(0.02mm + 3%)0-13 mm

Probe Details

All gages come complete with precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, wrist strap (built-in style only), nylon carrying case with shoulder strap, Certificate of Calibration traceable to NIST, two (2) year warranty.

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTest

For the non-destructive measurement of nonmagnetic coatings such as (paint, enamel, plastic, galvanizing, metalizing, plating, etc.) on STEEL.

ACCURATE

  • Certificate of Calibration showing traceability to N.I.S.T. included with every gage
  • Matching Calibration Standards and Procedures available for every model
  • Highly wear resistant Carbide Probe for longest life and continuous accuracy
  • Remove center of dial cover for easy calibration adjustment
  • Conforms to national and international standards

DURABLE

  • Extra rugged housing, not affected by mechanical shock, water, acid or solvents
  • Unique overall design, fully supported, positive positioning, no pivoting tendencies during measurement
  • Can be used fully supported or with only the front probe area contacting the surface
  • Functions on a permanent rare-earth cobalt magnet, no battery
  • Explosion Proof - Refinery safe
  • 1 year warranty

EASY TO USE

  • Positive visual and audible indicators to designate when thickness reading is established
  • Positive visual and audible indicators to designate when thickness reading is established
  • Compact, lightweight, precisely balanced, independent of gravity - can be used in any position
  • GO/NO-GO button can be pre-set for rapid measurement
  • Probe contact and dial rotation all in a one-finger operation
  • Furnished with wrist strap, neck strap and instructions in a high quality leather case With belt loops for your convenience

     

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTest DFT

Two Models

  • PosiTest DFT Ferrous
     measures both non-magnetic coatings on steel

  • PosiTest DFT Combo
    measures both non-magnetic coatings on steel AND non-conductive coatings on aluminum, brass, etc. Automatically recognizes the substrate and takes a measurement.

Features

  • Fast, repeatable measurements
  • No calibration required for most applications
  • ZERO feature for rough or curved surfaces
  • Handy RESET feature when no zero reference is available
  • Strong, wear-resistant, ruby-tipped probe
  • Audible and visible measurement indication
  • V-groove in probe for positioning on cylindrical parts
  • Mils/Microns switchable
  • Basic instructions on the back of each gage

Specification

Measurement Range 0-40 mils 0 - 1000 µm
Accuracy ±(0.1 mils + 3%) ±(2µm + 3%)
Size 4 x 1.5x0.9 in. 100x38x23 mm
Weight 2.5 oz. 70 g

Gage Comes Complete with built-in probe, plastic shims, hard shell storage case, AAA battery, instructions and one (1) year warranty.

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTest® Pull-Off Adhesion Tester

Measures the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed in psi or MPa on a precision digital indicator.

 

Simple

  • Portable, hand-operated instrument requires no external power source - ideal for lab and field use
  • Large, easy-to-read LCD
  • Pull Rate Indicator - allows operator to easily monitor and adjust the rate of pull in accordance with international test methods
  • Easily select dolly sizes, change measurement units or store readings, with the touch of a button
  • Conversion charts not required - tester automatically calculates pressure based on dolly size
  • Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
  • Each kit comes with everything needed for testing
Durable

  • Weatherproof, dustproof and shockproof
  • Quality hydraulic pump can be used in any position
  • Rugged carrying case
  • One year warranty
Accurate

  • Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using an NIST traceable load cell
  • Self-aligning dolly enables accurate measurements on smooth or uneven surfaces
  • Hi-grade, industrial pressure sensor ensures continued accuracy
  • Conforms with ASTM D4541, ISO 4624 and others
Versatile

  • Internal Memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls
  • Optional PosiSoft® software available for downloading to a computer
  • 10,14, 20 or 50 mm dollies maximize capability and accuracy across a wide range of bond strengths
  • LCD displays pressure value in psi or MPa

 

 

Dolly Size 20 mm
Resolution ± 1 MPa (1 psi)
Accuracy ± 1 % Full Scale
Adhesion Strength 0-20 MPa (0-3000 psi)

 

 Each Kit includes:

  • Adhesion tester with digital display
  • 20 mm aluminum test dollies (20)
  • Abrasive pad
  • Cutting tool
  • Adhesive with mixing sticks and palettes
  • Cotton swabs
    • AAA batteries (2)
  • Instruction booklet
  • Certificate of Calibration traceable to NIST
  • Instructional video
  • One-year warranty
  • Sturdy, lightweight carrying case

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTector Ultrasonic Thickness Gage

 

Measures the wall thickness of materials such as steel, plastic and more.  Ideal for measuring the effects of corrosion or erosion on tanks, pipes or any structure where access is limited to one side. Multiple echo (ME) Thru-Paint models measure the metal thickness of a painted structure without having to remove the coating.

Simple

  • Large, easy-to-read, graphics LCD with multilingual support
  • One-handed menu navigation
  • Pre-programmed velocities - simply select from a list of common materials or enter your own with ease
  • Bi-color indicator light - ideal in a noisy environment
  • RESET feature instantly restores factory settings

New UTG ME Thru-Paint model
measures the metal thickness of a
painted structure without having
to remove the coating.

Durable

  • Solvent, acid, oil, water and dust resistant-meets or exceeds IP5X
  • Scratch/Solvent resistant display suitable for harsh environments
  • Shock-absorbing protective rubber holster with belt clip
  • Two (2) year warranty on both gage body and probe
Accurate

  • Precision transducers provide fast, accurate readings
  • Certificate of Calibration showing traceability to NIST
  • Hi-RES mode increases displayed resolution for use on applications that require greater precision to NIST included with every gage
  • Conforms to national and international standards including ASTM E797

Flip Display enables right-side-up viewing
whether the gage is in your hand,
on your belt or on a worktable

Versatile

  • HiLo Alarm – dual-tone alarm and bi-color indicator light audibly and visibly alerts when measurements exceed operator selected limits
  • Internal memory stores up to 10,000 readings in up to 1,000 batches
  • Built-in Clock – date and time stamps each stored measurement
  • USB and IR ports for downloading to a PC, printer or data collector
  • Flip Display for right-side-up viewing
  • Backlit display for dim or dark environments
  • Single or two point adjustment
  • Inch/mm switchable
  • Selectable display languages including: English, Spanish, French, German, Portuguese, Chinese, Japanese, Norwegian, Polish, Russian, Czech and Italian

For more details on Defelsko products please visit www.defelsko.com

Top

PosiTectof Dew Point Meter

Simple

  • Large, easy-to-read, graphics LCD with multilingual support
  • One-handed menu navigation
  • Audio and visual alarm – indicates when climatic conditions are unsuitable for painting.
  • No need to consult complex tables or use a slide rule calculator
  • Bi-color indicator light – ideal in a noisy environment
  • All 5 parameters are constantly updated and displayed simultaneously
  • Graph mode charts all 5 parameters for quick analysis.

Graph Mode charts all 5
parameters for quick analysis

Durable

  • Rugged, outdoor/indoor instrument
  • Solvent, acid, oil, water and dust resistant - meets or exceeds IP5X
  • Scratch/Solvent resistant display suitable for harsh environments
  • Shock-absorbing protective rubber holster with belt clip and wrist strap
  • Two (2) year warranty on both body and sensors

Magnetic surface temperature probe available
for hands-free recording

Accurate
  • Fast response precision sensors provide accurate, repeatable readings with high reliability and long term stability
  • Smart Trend Indicators™ identify rising, falling or stable readings
  • Certificate of Calibration showing traceability to NIST included
  • Conforms to national and international standards including ISO 8502-4 , BS 7079-B4, ASTM D3276-05 , and SSPC-PA7

Flip Display enables right-side-up viewing
in any position.

Versatile

  • Internal Memory stores 2,500 datasets in 100 batches with the simple touch of a button
  • Data Logger Mode automatically records all 5 parameters at user selected time intervals. Ideal for unattended operation
  • Built-in clock – date and time stamps each stored measurement
  • Easily converts to accept optional probes including magnetic and hand-held surface temperature probes
  • USB and IR ports for downloading to a PC or printer
  • Flip Display for right-side-up viewing
  • Celsius/Fahrenheit switchable
  • Backlit display for dim or dark environments

For more details on Defelsko products please visit www.defelsko.com

Top

 


 
 

 

Website designed & maintained by Webz Solutions™